Bus cable for Domintell LightBus - pre-tubed in 100 m rolls
Bus cable for Domintell LightBus pre-tubed in 100 meters roll.
The blue DCBL bus cable is dedicated to Domintell LightBus for the management of low voltage lighting through driver-dimmers (e.g. DLBD500). It can be powered via a power supply between 24 and 48 Vdc. The data is transmitted via a twisted pair according to the RS-485 standard.
As Domintell LightBus operates with dedicated driver-dimmers (DLBXX), it is recommended to use LED lamps without integrated drivers.
We recommend to use Domintell LightBus in association with LED lamps of the range proposed in our offer. DLIGHT lamps without drivers or lamps without drivers from our partner ORBIT® listed in our catalog are therefore recommended for use with our system, see our dedicated page.
The system is suitable for almost all types of LED lamps by using our driver-dimmer. Any light source is suitable: the forward voltage of the LEDs must be lower than the supply voltage. The direct voltage of the LEDs must be lower than the supply voltage of the LightBus. The connection of LED lamps in series is therefore permitted as long as the direct voltage is lower than the supply voltage of the LightBus.
Power supply: Dedicated class 2 power supply with double insulation (square symbol with double edge)
Supply voltage: 24-48 Vdc
Maximum current per bus segment: 5 A*.
Maximum cable length: Application**
Requires to be connected to the bus Domintell thanks to the interface module DDIMLV01.
* A bus segment is any part of the bus that starts at a power supply and ends at the last driver (DLB) of the segment
**An application is available to calculate the maximum distance depending on the number of drivers, their layout and the power of the lamps.
Sufficient power for all modules:
Multiple power supplies:
Fill in this form to place an order directly with our teams*.
*Shipping from Nivelles (Belgium)
You can also send an e-mail directly to orders@domintell.com.