LED strip amplifier


Since LED strips have a limited maximum length, the STRIPBOOST module is designed to facilitate RGBW LED strips extension by allowing additional segments to be added with a new power supply. It enables continuity of all four channels (Red, Green, Blue and White). It can also be used to extend the length of monochrome or tunable white LED strips.


RGBW channels: 4 inputs corresponding to the four colors of the initial LED strip.

V+ (positive voltage): coming from the power supply of the initial section of the LED strip.

RGBW channels: 4 outputs providing signals for the four colors on the new section of LED strip.

V+ (positive voltage): output for powering the new length of LED strip.
External power supply: input for the new power supply for the new length of LED strip. The power supply must be different from the basic power supply.

Power supply: original LED strip power supply

Maximum current per channel: 2 A
Power per channel: 24W at 12V, 48W at 24V
Max. peak current: 80 Amp / 5ms
Maximum cable cross-section: 1.5mm2
Minimum stripping: 8mm minimum
Certification: CE 2014/30/EU
Protection rating: IP20
Dimensions: 45mm x 45mm x 18mm
Degree of protection: IP20
Storage temperature: -25°C to 70°C
Operating temperature : -10 à 45 °C

Technical diagram



SKU: 5425014391053-1-1Categories: ,


Fill in this form to place an order directly with our teams*.

*Shipping from Nivelles (Belgium)

You can also send an e-mail directly to

Would you like to place an order?